CuBe2 | CW101C Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Remark
CW101C (DIN EN 1652 : 1998-03)	CW101C	DIN EN 1652 : 1998-03	Supersedes DIN 17670-1 : 1983-12, DIN 17670-2 : 1969-06, DIN 1751 : 1973-06, DIN 1791 : 1973-06	Valid	Germany	CuBe2, mat. No CW101C, is counted among hardenable, low alloyed copper alloys. To the comparable make CuBe2, mat. No 2.1247, acc. to DIN 17666 : 1983-12 applies: It is an alloy of optimal hardenability for highest requirements to strength, elasticity, abrasion and fatigue resistance. CuBe2 shows mean electrical and favorable thermal conductivity. The material does not show any embrittlement at lower temperatures (up to -200°C) as well as no stress corrosion sensitivity. The temperature for removal of workhardening approximates 350°C. Processing properties: hot and cold forming: good machinability: moderately hard and soft soldering: good gas shielded welding: good burnishing: good Application: For bearing jewels and screws, tensioning belts and wires, membranes, balance springs and drawn parts for watches, all types of springs. Individual parts for HF- and NF- special couplers, wear-resistant worms and gear-wheels, high-stress solid components, non-magnetic and spark-safe. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)

Chemical Composition

Be [%]	Co [%]	Fe [%]	Ni [%]	Source	Remark
blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Strength Abbrevation	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Elongation A50 [%]	Hardness HV	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Condition	Temperature [°C]	Melting Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Mean Coefficient of Thermal Expansion [10^-6*K^-1]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Electric Conductivity [MS/m]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Heat Treatment

Heat Treatment	Temperature [°C]	Source	Remark
blur	blur	blur	blur
blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
CuBe2	Europe	EN 1652
CuBe2	Europe	EN 12420
CuBe2	Europe	EN 1654
CuBe2	International	ISO 1187-83
C17200	USA	UNS
C17200	USA	AMS 4530
C17200	USA	AMS 4532
C17200	USA	AMS 4533
C17200	USA	AMS 4534
C17200	USA	AMS 4535
C17200	USA	AMS 4650
C17200	USA	AMS 4651
C17200	USA	AMS 4725
B194 UNS C17200	USA	ASTM B194
B196 UNS C17200	USA	ASTM B196
B197 UNS C17200	USA	ASTM B197
B570 UNS C17200	USA	ASTM B570
B643 UNS C17200	USA	ASTM B643
C17200	USA	SAE J461
C17200	USA	SAE J463
CuBe2	Germany	DIN 1787	DIN CEN/TS 13388 (DIN SPEC 9700)
2.1247	Germany	DIN 1787	DIN CEN/TS 13388 (DIN SPEC 9700)

Producer/Supplier/Trade names

Tradename	Supplier
CuBe2	Heraeus Deutschland GmbH & Co. KG, Hanau
CuBe2	CSN Carl Schreiber GmbH, Neunkirchen
Alloy 25	Materion Brush GmbH, Stuttgart
CuBe2	Schreier Metall GmbH, Erkrath
CuBe2	G.Rau GmbH & Co. KG, Pforzheim
CuBe2	Wieland Prometa GmbH, Düsseldorf
ELMEDUR B2	ThyssenKrupp Schulte GmbH, Essen

Material Compliance

REACh	RoHS
blur	blur

CuBe2 (CW101C; DIN EN 1652 : 1998-03)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

CuBe2 (precipitation hardened (+P))

Linear-elastic

Temperature [°C]	Young's modulus [GPa]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Classification

Treatment	Source description
blur	blur

CuBe2 (solution heat-treated and cold rolled; bar; 1.000-15.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

CuBe2 (solution heat-treated, cold worked and precipitation hardened; bar; 1.000-15.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

CuBe2 | CW101C Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

CuBe2 (CW101C; DIN EN 1652 : 1998-03)

Linear-elastic

Yield strength

Coefficient thermal expansion

Density

Tensile strength

Thermal conductivity

Classification

Designation

CuBe2 (precipitation hardened (+P))

Linear-elastic

Density

Thermal conductivity

Classification

CuBe2 (solution heat-treated and cold rolled; bar; 1.000-15.000mm)

Yield strength

Tensile strength

Classification

CuBe2 (solution heat-treated, cold worked and precipitation hardened; bar; 1.000-15.000mm)

Yield strength

Tensile strength

Classification

Similar Materials