S235J2 | 1.0117 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
1.0117 (DIN EN 10025-2 : 2019-10)	1.0117	DIN EN 10025-2 : 2019-10	Supersedes DIN EN 10025 : 2005-04	Valid	Germany	S235J2	The hot rolled, unalloyed quality steel S235J2 is a fine grained steel for welding constructions for alternate loading. The steel is not intended for heat treatment. Stress relieving annealing is allowed. Products in the delivery condition +N may be hot formed and/or normalized after delivery. For long products and continuous rolled flats the delivery condition is up to the producer +AR, +N or +M. The delivery condition of four-high rolled sheet is also up to the producer and may be +AR or +N. Both conditions can be ordered. For this steel are available (mat. no 1.0119, S235J2C) grades for folding, roll forming to shape and cold drawing. The steel grade S235J2 (1.0117) replaces the steel grade S235J2G3 (1.0116) according to EN 10025 (1994-03).

Chemical Composition

C [%]	Cu [%]	Mn [%]	P [%]	S [%]	Source
blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength [MPa]	Elongation A [%]	Elongation A80 [%]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Poisson's Ratio	Source	Remark
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur

Welding and Joining

Procedure	Welding and Joining - Evaluation	Added Materials	CE [%]	Information	Source	Remark
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

Toughness Data (Impact)

Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Temperature [°C]	Source	Remark
blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
Q235D	China	GB/T 700	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
U12359	China	GB/T 700	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
Q235D	China	GB/T 3524	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
U12359	China	GB/T 3524	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
Q235D	China	GB/T 8162	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
U12359	China	GB/T 8162	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
S235J2	Europe	EN 10025-2
Fe360	India	IS 1570 : Part 1	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
FeE230	India	IS 1570 : Part 1	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
E250	India	IS 2062	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
S235D	International	ISO 630-2	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
SS330	Japan	JIS G 3101	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
SS330	South Korea	KS D 3503	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
S235J2	Germany	AD 2000 W 1
S235J2	Germany	AD 2000 W 13
S235J2G4	Europe		Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
Fe 360 D1	Germany		Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier
S235J2	ArcelorMittal Distribution GmbH, Köln
S235J2	Salzgitter Flachstahl GmbH, Salzgitter
precidur S235J2	ThyssenKrupp Steel Europe AG, Duisburg
S235J2	voestalpine AG, Linz

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Fracture Toughness

Nominal Size [mm]	Temperature [°C]	Yield Strength [MPa]	Plane-Strain Fracture Toughness KIc [MPa*m^½]	Critical Stress Intensity Kc [MPa*m^½]	Source	Remark
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

S235J2 (1.0117; DIN EN 10025-2 : 2019-10)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

S235J2 (normalized or normalized formed (+N); sheet; tension/compression; flaw)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Load type	Failure criteria	Source description
blur	blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); plate; 12.000mm; tension/compression; fracture)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Source description
blur	blur	blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); sheet; tension/compression; fracture)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Load type	Failure criteria	Source description
blur	blur	blur	blur	blur

S235J2 (tension/compression; fracture)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Load type	Failure criteria	Source description
blur	blur	blur

S235J2 (normalized or normalized formed (+N); bar; 16mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

S235J2 (stress relieved; 6mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 0.000-1.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 1.000-1.500mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 1.500-2.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 2.000-2.500mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 2.500-3.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 3.000-16.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 16.000-40.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 40.000-63.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 63.000-80.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 80.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 100.000-150.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 150.000-200.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 200.000-250.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 250.000-400.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); flat product; 0.000-16.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); flat product; 16.000-40.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); flat product; 40.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); flat product; 100.000-150.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); long product; 0.000-16.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); long product; 16.000-40.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); long product; 40.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (normalized or normalized formed (+N); long product; 100.000-150.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235J2 (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); 40.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur

Classification

Treatment	Dimension [mm]	Source description
blur	blur	blur