S235J0C | 1.0115 Material Datasheet
Unlock Exclusive Materials Data
Gain access to a wealth of materials data by joining our Materials Portal.
Register for Free or Upgrade for Full AccessMaterial Description
| Material Number | Material Number (single) | Standard | Range of Application | Standard Status | Country | Predecessor | Remark |
|---|---|---|---|---|---|---|---|
| 1.0115 (DIN EN 10025-2 : 2019-10) | 1.0115 | DIN EN 10025-2 : 2019-10 | Supersedes DIN EN 10025 : 2005-04 | Valid | Germany | S235J0C | S235J0C is the cold forming grade of the S235J0. The steel is suited for bending and folding up to thicknesses of 30 mm and suited for roll forming up to 8 mm thickness (minimum values for the radius see Formability - Bending - Folding). Application: structural steel work |
Chemical Composition
| C [%] | Cu [%] | Mn [%] | N [%] | P [%] | S [%] | Source |
|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur |
Mechanical Properties
| Semi-finished Product | Condition | Nominal Size [mm] | Temperature [°C] | Specimen Direction | Tensile Strength [MPa] | Yield Strength [MPa] | Elongation A [%] | Elongation A80 [%] | Source | Remark |
|---|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Physical Properties
| Temperature [°C] | Density [g/cm³] | Source |
|---|---|---|
| blur | blur | blur |
Welding and Joining
| Procedure | Welding and Joining - Evaluation | Added Materials | Information | Source | Remark |
|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
Heat Treatment
| Heat Treatment | Temperature [°C] | Source | Remark |
|---|---|---|---|
| blur | blur | blur | blur |
Cross Reference
| Material Name | Country | Standard | Source |
|---|---|---|---|
| S235J0C | Europe | EN 10025-2 | |
| E250 | India | IS 2062 | Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach |
| QSt 37-3 U | Germany | Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach |
Producer/Supplier/Trade names
| Tradename | Supplier |
|---|---|
| S235J0C | ArcelorMittal Distribution GmbH, Köln |
| S235J0C | Salzgitter Flachstahl GmbH, Salzgitter |
| S235J0C | ThyssenKrupp Steel Europe AG, Duisburg |
| S235J0C | voestalpine AG, Linz |
Material Compliance
| REACh | RoHS |
|---|---|
| blur | blur |
FKM Guideline Fatigue Strength
| Semi-finished Product | Condition | Nominal Size [mm] | Tensile Strength [MPa] | Yield Strength [MPa] | Fatigue Limit under rev. Tension-Compression Stresses [MPa] | Fatigue Strength under pulsating Tensile Stresses [MPa] | Bending Fatigue Strength [MPa] | Shear Fatigue Strength [MPa] | Torsion Fatigue Strength [MPa] | Source | Remark |
|---|---|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Formability - Bending - Folding
| Condition | Nominal Size [mm] | Radius of Bend [mm] | Rolling Direction | Source | Remark |
|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur |
S235J0C (1.0115; DIN EN 10025-2 : 2019-10)
Linear-elastic
| Temperature [°C] | Young's modulus [GPa] | Poisson's ratio |
|---|---|---|
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
Alternating stress
| Temperature [°C] | Stress ratio | Alternating stress [MPa] | Cycles |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Density
| Temperature [°C] | Density [g/cm³] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Source description |
|---|---|
| blur | blur |
Designation
| Designation | Material number | Source |
|---|---|---|
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
S235J0C (normalized or normalized formed (+N); sheet; tension/compression; flaw)
Alternating stress
| Temperature [°C] | Stress ratio | Alternating stress [MPa] | Cycles |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Classification
| Treatment | Semi-finished product | Load type | Failure criteria | Source description |
|---|---|---|---|---|
| blur | blur | blur | blur | blur |
S235J0C (normalized or normalized formed (+N); plate; 12.000mm; tension/compression; fracture)
Alternating stress
| Temperature [°C] | Stress ratio | Alternating stress [MPa] | Cycles |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Source description |
|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur |
S235J0C (normalized or normalized formed (+N); sheet; tension/compression; fracture)
Alternating stress
| Temperature [°C] | Stress ratio | Alternating stress [MPa] | Cycles |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Classification
| Treatment | Semi-finished product | Load type | Failure criteria | Source description |
|---|---|---|---|---|
| blur | blur | blur | blur | blur |
S235J0C (tension/compression; fracture)
Alternating stress
| Temperature [°C] | Stress ratio | Alternating stress [MPa] | Cycles |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Classification
| Load type | Failure criteria | Source description |
|---|---|---|
| blur | blur | blur |
S235J0C (normalized or normalized formed (+N); bar; 16mm; fracture)
Strain life
| Temperature [°C] | Cyclic fatigue strength coefficient [MPa] | Cyclic fatigue strength exponent | Ductility coefficient [Pa] | Ductility exponent | Cyclic strength coefficient [MPa] | Cyclic strain hardening exponent | Young's modulus [GPa] |
|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Failure criteria | Source description |
|---|---|---|---|---|
| blur | blur | blur | blur | blur |
S235J0C (stress relieved; 6mm; fracture)
Strain life
| Temperature [°C] | Cyclic fatigue strength coefficient [MPa] | Cyclic fatigue strength exponent | Ductility coefficient [Pa] | Ductility exponent | Cyclic strength coefficient [MPa] | Cyclic strain hardening exponent | Young's modulus [GPa] |
|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur |
Classification
| Treatment | Dimension [mm] | Failure criteria | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 0.000-1.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 1.000-1.500mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 1.500-2.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 2.000-2.500mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 2.500-3.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 3.000-16.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 16.000-40.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 40.000-63.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 63.000-80.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 80.000-100.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 100.000-150.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 150.000-200.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as-rolled (+AR) or normalizing rolled (+N) or thermomechanical rolled (+M); wire; 200.000-250.000mm)
Yield strength
| Temperature [°C] | Yield strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (as rolled (+AR); bar; 40.000mm)
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |
S235J0C (normalized or normalized formed (+N); bar; 40.000mm)
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| Treatment | Semi-finished product | Dimension [mm] | Source description |
|---|---|---|---|
| blur | blur | blur | blur |