X5CrNi18-10 | 1.4301 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
1.4301 (DIN EN 10263-5 : 2018-02)	1.4301	DIN EN 10263-5 : 2018-02	Supersedes DIN EN 10263-5 : 2002-02	Valid	Germany	X5CrNi18-10	Austenitic stainless steel round rod, round bars and wire intended for cold heading and cold extrusion.

Chemical Composition

C [%]	Cr [%]	Cu [%]	Mn [%]	N [%]	Ni [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Reduction of Area [%]	Source
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Cross Reference

Material Name	Country	Standard	Source
ML06Cr19Ni9	China	GB/T 4232	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
S30408	China	GB/T 4232	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
X5CrNi18-10	Europe	EN 10263-5
X5CrNi18-9E	International	ISO 4954	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
SUS304	Japan	JIS G 4315	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
STS304	South Korea	KS D 3697	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
304	USA		Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
S30400	USA	UNS	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
X 5 CrNi 18 9	Germany		Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier	Source
X 18 J	AUBERT & DUVAL Deutschland GmbH, München	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
BGH 4301	BGH Edelstahl Siegen GmbH	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
BÖHLER A500	voestalpine High Perfomance Metals Deutschland GmbH, Düsseldorf	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
Acidur 4301	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
SAW	Dörrenberg Edelstahl GmbH, Engelskirchen	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
AISI 304-IMA	Hempel Special Metals GmbH, Oberhausen	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
Koro 4301	Koring + Rottsieper Edelstahl GmbH + Co.KG, Remscheid	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
Core 304/4301	Outokumpu Deutschland GmbH, Düsseldorf	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Material Compliance

REACh	RoHS
blur	blur

X5CrNi18-10 (1.4301; DIN EN 10263-5 : 2018-02)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

X5CrNi18-10 (hot rolled and solution heat-treated; sheet; 6mm; load drop)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X5CrNi18-10 (quenched (+Q); bar; 6mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X5CrNi18-10 (solution annealed (+AT); 6.35mm; load drop)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

X5CrNi18-10 (sheet; 14mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat-treated or solution heat-treated and peeled (+AT or +AT+PE); wire; 5.000-50.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat-treated and cold drawn; wire; 5.000-10.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat-treated and cold drawn; wire; 10.000-25.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat-treated, cold drawn and solution heat-treated (+AT+C+AT); wire; 2.000-5.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat-treated, cold drawn and solution heat-treated (+AT+C+AT); wire; 5.000-25.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat treated, cold drawn, solution heat-treated and skin passed (+AT+C+AT+LC); wire; 2.000-5.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat treated, cold drawn, solution heat-treated and skin passed (+AT+C+AT+LC); wire; 5.000-10.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X5CrNi18-10 | 1.4301 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Cross Reference

Producer/Supplier/Trade names

Material Compliance

X5CrNi18-10 (1.4301; DIN EN 10263-5 : 2018-02)

Strain life

Linear-elastic

Alternating stress

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

X5CrNi18-10 (hot rolled and solution heat-treated; sheet; 6mm; load drop)

Strain life

Classification

X5CrNi18-10 (quenched (+Q); bar; 6mm; fracture)

Strain life

Classification

X5CrNi18-10 (solution annealed (+AT); 6.35mm; load drop)

Strain life

Classification

X5CrNi18-10 (sheet; 14mm; flaw)

Strain life

Classification

X5CrNi18-10 (solution heat-treated or solution heat-treated and peeled (+AT or +AT+PE); wire; 5.000-50.000mm)

Tensile strength

Classification

X5CrNi18-10 (solution heat-treated and cold drawn; wire; 5.000-10.000mm)

Tensile strength

Classification

X5CrNi18-10 (solution heat-treated and cold drawn; wire; 10.000-25.000mm)

Tensile strength

Classification

X5CrNi18-10 (solution heat-treated, cold drawn and solution heat-treated (+AT+C+AT); wire; 2.000-5.000mm)

Tensile strength

Classification

X5CrNi18-10 (solution heat-treated, cold drawn and solution heat-treated (+AT+C+AT); wire; 5.000-25.000mm)

Tensile strength

Classification

X5CrNi18-10 (solution heat treated, cold drawn, solution heat-treated and skin passed (+AT+C+AT+LC); wire; 2.000-5.000mm)

Tensile strength

Classification

X5CrNi18-10 (solution heat treated, cold drawn, solution heat-treated and skin passed (+AT+C+AT+LC); wire; 5.000-10.000mm)

Tensile strength

Classification

Similar Materials